Engineering blog
Blog
Practical writing on embedded systems — how to get started, what to choose, and what actually happens between a prototype and a product.
6 articles, no fluff.
Featured
Build in-house or outsource — who should develop your hardware
When hiring an embedded engineer pays off, when outsourcing wins, and the expertise cliff nobody prices in up front.
5 September 2026 · 4 min read
Teaching Arduino without teaching syntax first
The first Arduino lesson usually fails on a missing semicolon, not on electronics. When visual programming is the right first step, and when it is time to move to real C.
5 September 2026 · 3 min read
From idea to product — what happens between prototype and production
The stages nobody warns you about, between "it works on the bench" and something you can actually sell.
19 August 2026 · 1 min read
What embedded job interviews actually ask
The topics that come up in nearly every technical interview in this field, and what interviewers are really listening for.
19 August 2026 · 1 min read
STM32 vs ESP32 — how to choose a controller for your project
The two most common controllers in real projects, and what should actually decide between them — beyond the spec sheet.
19 August 2026 · 2 min read
Getting into embedded systems — a practical route
What you actually need to know to start working in embedded, in what order to learn it, and what you can safely skip at first.
19 August 2026 · 2 min read